The braid protects the cable, not the connector
A nylon braided jacket resists everyday scuffs and tangling, but the weak points in any USB-C cable are the two ends where the connector meets the cable. Most fraying starts there, not in the middle of the braid. So the routine below focuses on strain relief, clean coiling and honest end-of-life checks rather than polishing the braid.
The advice is generic cable care. The UGREEN records supplied here confirm the materials and power ratings of two cables but do not include manufacturer care or installation instructions, so treat the steps as sensible handling habits, not a warranty procedure.
What the UGREEN cable records confirm
- UGREEN USB-C to USB-C 100W 5A Charger Cable (Nylon Braided): UGREEN USB-C to USB-C 100W 5A Charger Cable (Nylon Braided) supports up to 100W power delivery and 5A current, with a nylon braided exterior. The 100W/5A rating is the reason to protect the cable rather than replace it casually; the braid is the outer layer you are maintaining.

UGREEN USB-C to USB-C 100W 5A Charger Cable (Nylon Braided) - UGREEN Lot de 2 Câble USB C vers USB C Nylon Tressé PD 100W: UGREEN Lot de 2 Câble USB C vers USB C Nylon Tressé PD 100W is a two-pack of USB-C to USB-C cables rated for Power Delivery up to 100W, with a durable nylon braided exterior. A two-pack gives you a spare, which makes it easier to rotate cables and let one rest instead of overworking a single cable.

UGREEN Lot de 2 Câble USB C vers USB C Nylon Tressé PD 100W
A simple care routine for a nylon braided USB-C cable
These steps keep stress away from the connector joints and reduce the twisting that loosens braid and insulation over time.
- Coil loosely, don't wrap tight: Form a loose loop about the size of your hand and avoid pulling the cable tight around a charger or laptop. Tight wrapping puts constant tension on the connector joint, which is where fraying usually begins.
- Use the connector body, not the cable: Pull the plug by the rigid connector housing, not by the braided cable. Tugging the cable trains the joint to flex in the wrong place.
- Leave slack at both ends: When charging, keep a little slack so the cable is not hanging from the port or bent sharply against a table edge. A sharp bend right behind the connector is the most common place for a braid to split.
- Store it separately: Keep the cable in its own pocket or loop rather than loose in a bag with keys and adapters. The braid resists tangling, but abrasion against hard objects still wears the jacket.
- Rotate between cables: If you own the UGREEN two-pack, alternate the cables between home, office and travel. Spreading use gives each cable time to cool and reduces repeated bending in the same spot.
What to check before fraying becomes a safety issue
A worn braid is cosmetic until the inner conductors or the connector joint are exposed. Check these points every few weeks, especially on a cable you coil and uncoil daily.
- Exposed wire or inner insulation: If you can see metal or the inner insulation through the braid, stop using the cable for charging. Replace it rather than taping it.
- Wobbly or bent connector: A connector that rocks in the port or has bent pins can damage the port. Retire the cable.
- Heat at the plug: Warmth is normal during fast charging, but a plug that becomes unusually hot or smells of hot plastic is a sign to stop and replace.
- Intermittent charging: If the device only charges at certain angles, the joint is failing internally. Replace the cable before it damages the port.
What the records don't tell you about 100W care
The supplied records confirm 100W and 5A ratings but do not include cable length, jacket temperature limits, bend-radius specifications or manufacturer cleaning instructions. That means you should not assume a particular bend radius or cleaning method is approved. The safe approach is the generic one: avoid sharp folds, keep connectors clean and dry, and replace the cable if the braid or joint is damaged.
The 100W rating also depends on the charger and device supporting the same Power Delivery profile. The cable is rated for the current and power, but the record does not confirm which specific laptop, tablet or phone models will negotiate 100W. Check your device's charging specification before expecting full speed.



