Back to Blog
How-to Guides 2026-11-17 UGREEN Official Site 0 views

How to Use the UGREEN MagFlow Pin Magnetic Wireless Power Bank

How to Use the UGREEN MagFlow Pin Magnetic Wireless Power Bank

A practical walkthrough for the UGREEN MagFlow Pin power bank: magnetic alignment, 15W wireless charging, 20W wired backup, and low current mode for small devices.

Start with the two ways this power bank charges

The UGREEN MagFlow Pin is a 10000mAh magnetic wireless power bank. It charges compatible phones wirelessly at up to 15W when aligned magnetically, and it also has a cable output rated at 20W. Knowing which mode you are using is the first step to a reliable charge.

The catalog confirms Qi2 certification, a low current mode, and a size tailored for iPhone models. It does not list specific iPhone model numbers, so check your phone's compatibility with Qi2 magnetic accessories before relying on the wireless mode.

What the MagFlow Pin record confirms

How to set up magnetic wireless charging

  1. 1. Check that your phone supports Qi2 magnetic charging: The MagFlow Pin is Qi2 certified and tailored for iPhone, but the catalog does not list exact compatible models. If your phone is not a MagSafe-compatible iPhone or a Qi2 Android phone, use the cable instead.
  2. 2. Attach the power bank to the back of your phone: The magnets should snap the power bank into place. Make sure the power bank is centered on the phone's wireless charging coil; a case that is too thick or not magnetic-friendly can weaken the connection.
  3. 3. Confirm charging has started: Your phone should show a charging indicator. If it does not, remove the case, re-align the power bank, and try again. The catalog does not specify a particular indicator light on the power bank, so rely on your phone's screen.
  4. 4. Leave it aligned while charging: Wireless charging at 15W generates some heat. For best results, keep the phone and power bank in a well-ventilated spot and avoid stacking other items on top.

When to switch to the 20W cable

Wireless charging is convenient, but it is not always the fastest option. The MagFlow Pin's cable output is rated at 20W, which is higher than the 15W wireless maximum. If your phone supports fast wired charging, plugging in can top up the battery more quickly.

Use the cable when you need a quick charge before heading out, when your phone does not support magnetic wireless charging, or when the power bank and phone are in a bag and alignment cannot be maintained. The catalog does not specify which cable or port type is used, so refer to the product's included accessories or manual.

Practical tips for magnetic alignment and charging

  • Keep the back of the phone clean: Dust or grit between the power bank and phone can reduce grip and interfere with wireless charging. Wipe both surfaces before attaching.
  • Avoid thick or metal cases: Cases with metal plates or excessive thickness can block the magnetic connection or reduce charging speed. The catalog does not list a maximum case thickness, so test your own case.
  • Use low current mode for small devices: The MagFlow Pin has a low current mode for devices that need very little power. The catalog does not explain how to enable it, so check the product manual for the specific button or sequence.
  • Do not cover the power bank while charging: Wireless charging produces heat; covering the power bank can trap heat and slow charging. Keep it exposed to air.

What the catalog leaves open

The supplied record does not include the exact iPhone models supported, the type of cable port, the time required to recharge the power bank itself, or the steps to activate low current mode. These details are not confirmed by the available information, so consult the user manual or product packaging for specifics.

This does not mean the product lacks these features; it simply means the catalog excerpt does not cover them. For critical compatibility questions, check with UGREEN support before you buy.

Related Articles

Customer Service
Home
Products
Cart
Profile