UGREEN Uno 100W Charger: Fast-Charge Phones and Laptops
By UGREEN Official Site | Published: 2026-11-04
Category: Guides pratiques
Learn how to set up the UGREEN Uno 100W charger and fast-charge your phone and laptop together using the right cables and USB-C PD tips.
Quick answer
Plug the UGREEN Uno 100W charger into a wall outlet, connect your laptop to the USB-C port that supports 100W using a 100W-rated cable, and connect your phone to a second port. This lets you fast-charge both devices at the same time, provided your laptop and phone support USB-C Power Delivery.
Why cable rating matters more than port count
The UGREEN Uno 100W charger can deliver up to 100W, but the cable you use must also be rated for 100W. A lower-rated cable will limit charging speed to what it can safely handle, often 60W or less. Check the cable’s packaging or markings for a 100W or 5A rating before connecting your laptop.
When charging two devices at once
The charger’s total output is shared between connected devices. If you charge a laptop and a phone together, the laptop may receive less than 100W depending on the charger’s power distribution. For the fastest laptop charge, connect it alone or check your laptop’s accepted wattage to see if simultaneous charging still meets your needs.
Step-by-step setup for fast-charging phones and laptops
- Check your device’s USB-C PD support: Confirm that your laptop and phone support USB-C Power Delivery (PD). Most modern laptops and phones do, but some older models rely on proprietary fast-charging standards. If your device does not support PD, it will still charge, but likely at a slower rate. Look for “USB PD” or “Power Delivery” in your device specs.
- Use a 100W-rated USB-C cable for the laptop: Connect your laptop to the charger using a USB-C to USB-C cable rated for 100W (5A). A lower-rated cable will cap the charging speed. The cable should have an e-marker chip for safety at 100W. Check the cable’s connector or packaging for “100W” or “5A”.
- Plug the charger into a wall outlet: Insert the UGREEN Uno 100W charger into a standard wall socket. Avoid plugging it into a power strip that is already loaded with other high-power devices, as this can cause tripping or reduced performance. Use a dedicated outlet or a power strip with a high enough rating.
- Connect your laptop first: Plug the 100W cable into the charger’s USB-C port that supports 100W output (usually marked, but check the port labeling). Then connect the other end to your laptop. The laptop should begin charging immediately. Some chargers have multiple ports; use the one labeled for 100W if available.
- Connect your phone to a second port: Use a separate USB-C cable to connect your phone to another port on the charger. The charger will share power between devices. Your phone will still fast-charge if it supports PD and the remaining power is sufficient. If your phone does not fast-charge, try disconnecting the laptop to see if power sharing is the cause.
- Verify charging speeds: Check your laptop’s charging indicator or system settings to confirm it is receiving power. For phones, look for a fast-charging notification. If speeds seem slow, try a different cable or port, and ensure the wall outlet is providing full power. Test with one device at a time to isolate cable or port issues.
Product facts
- UGREEN Uno หัวชาร์จ 100W: Delivers up to 100W of charging power for fast and efficient performance. This wattage is enough to fast-charge many USB-C laptops and phones when paired with a compatible 100W cable.
UGREEN Uno หัวชาร์จ 100W - UGREEN Uno หัวชาร์จ 100W: Compact and portable design, suitable for home, office, or travel use. You can carry one charger for multiple devices instead of packing separate adapters.
